Wheel Truing

Connecting…

Measurements

Spoke 1 is the first spoke after the valve, going around in a fixed direction. Leave a cell empty to skip it.

3D view (deviations exaggerated)

low high Thicker spoke = higher tension. Dashed gray = no tension reading. “Sides apart” shows each side’s spokes in its own plane, one axle length beyond the axle end.

Drag to rotate, pinch or scroll to zoom, tap a spoke's rim point for details. Dashed circle = ideal rim.

Recommendation

+ = tighten (clockwise, looking at the nipple from the rim toward the hub), − = loosen. Apply, re-measure, and repeat: one pass is rarely perfect.

Before and after (predicted)

Measured After recommended turns
Lateral error (mm) + = toward right
Radial error (mm) + = high spot
Tension vs. target for its side (%)

Tap a spoke in a chart for details.

History

Each saved round keeps the readings, the turns the app recommended at that time and the key numbers. Open one to see every spoke. Add a note about what you actually did.

DateLateral rms (mm)Radial rms (mm)Tension (avg, spread)Turns

Say “next”, “back”, “repeat” or “stop”. Spokes that need no change are skipped.

Wheel settings

Enter a column

Load from history

Choose a saved round to put its readings into the table. Use “Open” in the History card to see all details first.

Save to history

Saved measurement

#SideLateralRadialTension (reading → value)Recommended ¼ turns

Calibrate from history

Pick a saved round before an adjustment and the round measured after it. The app compares what the rim and the tension actually did with what the current settings predict, and suggests better per-¼-turn values.